Latest alloy steel chain Tenders | Government alloy steel chain Tenders

CTN :45715785

20 Jul, 2026 NA

Bangalore - Karnataka

Tender For supply of sky blue 0 point 35 sq mm , c by a no 6 electrical cable copper multi conductor fibrous and pvc insulated hookup wire flexible yellow 0 point 35 sq mm , c by a no 6 electrical cable copper multi conductor fibrous and pvc insulated hookup wire flexible red 0 point 35 sq mm , c by a no 6 electrical cable copper multi conductor fibrous and pvc insulated wire white 0 point 35 sq mm , c by a no 6 electrical cable copper multi conductor fibrous and pvc insulated hookup wire flexible blue 0 point 35 sq mm , c by a no 6 electrical cable copper multi conductor fibrous and pvc insulated hookup wire flexible green 0 point 5 sq mm , c by a no 6 electrical cable copper multi conductor fibrous and pvc insulated hookup wire flexible yellow 0 point 5 sq mm , c by a no 6 electrical cable copper multi conductor fibrous and pvc insulated hookup wire flexible red 0 point 5 sq mm , c by a no 6 electrical cable copper multi conductor fibrous and pvc insulated hookup wire flexible sky blue 1 point 5 sq mm , copper ring terminal double splitter 2 sq mm x 6 point 5mm dia , copper tin braid 6 x 10 mm , copper tin braid 10 x 16 mm , copper tin braid 16 x 24 mm , copper tin braid 30 x 40 mm , insulating sleeve pvc white 32 mm dia , insulating sleeve pvc white 18 mm dia , insulating sleeve pvc white 16 mm dia , insulating sleeve pvc white 14 mm dia , insulating sleeve pvc white 12 mm dia , insulating sleeve pvc white 8 mm dia , insulating sleeve pvc white 6 mm dia , insulating sleeve pvc white 3 point 5 mm dia , insulating sleeve pvc white 3 mm dia , insulating sleeve pvc white 2 point 5 mm dia , insulating sleeve pvc white 2 mm dia , insulating sleeve pvc white 1 point 5 mm dia , cotton tape 20 mm width , surgical tape adhesive tape usp 20 mm width , insulation tape pvc black 18 mm width , nylon thread white 0 point 5 mm dia , locking wire steel 0 point 5 mm dia , atc binding wire 0 point 5 mm dia , atc binding wire 0 point 12 mm dia , potting compound ana bond 909 , solder soft 16 swg sn 63 percent pb 37 percent , solder flux , iso prophyl alcohal ipa , aluminium clad sheet 0 point 5mm thk 0 point 5 mm x 1200 x 100 mm is 737 , plastic cover 80 microns 18 inches x 24 inches , permanent marker pen black c/a no 6 aluminium alloy connector with olive drab chromate over cadmium plate with copper bush and protective cap ( copper inner outer bush, 45 pin female with straight split hood phenolic connector for screened clampsuit for 30x40 mm copper braid) sshr 60p 45esh3 jss:50860 as per sample, c/a no 6 aluminium alloy connector with olive drab chromate over cadmium plate with copper bush and protective cap( copper inner outer bush, 12 pin female with straight split hood phenolic connector for screened clamp for 16x24 copper braid) shr 32p 12esh1, jss:50860 as per sample, c/a no 6 aluminium alloy connector with olive drab chromate over cadmium plate wit4h copper bush and protective cap( copper inner outer bush, 15 pin female with right angle split hood phenolic connector for screened clamp) sshr 36u 15esh5, jss:50860 as per sample, c/a no 6 aluminium alloy connector with olive drab chromate over cadmium plate with copper bush and protective cap( copper inner outer bush, 4 pin female with right angle split hood phenolic connector for screened clamp) shr 20u 4esh8, jss:50860 as per sample, c/a no 6 aluminium alloy connector with olive drab chromate over cadmium plate with copper bush and protective cap( copper inner outer bush, 7 pin female with right angle hood phenolic connector for screened clamp) 2rm 18kue 7g1v1, jss:50860 as per sample, c/a //bid details 2 / 44

Central Government/Public Sector

CTN :45688683

16 Jul, 2026 63.29 Lacs

Ranga Reddy-T - Telangana

Tender For tender for supply of austenitic type-non magnetic stainless steel sheets conforming to hal std 1210 / 304 , qq-s-766 / 304 , astm a 240/ ams 5513 / 304 astm a666 / en 1.430 , en 10088-2 / bs 304 s 31 , bs 1449 part 2 / aisi304 size thickness 1.6 mm x 1000 mm x 2000 mm with pvc coating on both sides. , austenitic type (303) free machining non-magnetic bright quality stainless steel round , specification hal std 1206 / 303 , astm a 582 size dia 40 mm x 1 to 2 meters in length. , mild steel cold drawn round conforming to hal std 1001 , is 1570 part ii , grade c 20 / en 3 b , bs 970 / bs 070 m 20 , bs 970 size dia 45 mm x 1 to 2 meters in length. , spring steel wire is 4454 , part-1 , grade-3. dia 0.4mm , copper tube conforming to hal std 1311 , condition drawn , as per bs 2871 part 2 , c101 / is 2501 , etp tube size od 6 mm x 0.5 mm (id 5.0 mm) x 2 to 3 meters in length and ends should be covered with end caps. , al. rounds , con. to hal std 1257 or is 740-gr ric -1/2 hard(19000) or bs 1473-gr-ric-1/2h or enaw 573-3-1450 dia 3mmx2 to 3 mtr length , aluminium alloy sheets , hal std 1252-1/2h , size thickness 1.6mm x1000 x 2000mm , bs 1470-3103-h14 (ns-3)-1/2 h (h-4) , is 737-gr31000(ns 3) , half hard with pvc coating on both sides. , al.alloy sheet conf.to hal std 1252-3/4h , is 737-ns3 , l59 size thickness 1.63 mm x 1000 x 2000 mm.with pvc coated on bith sides. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 , th.thickness 10 mm , min. size 1000x1000mm , tolerances as per ansi h35.2/ hal std. 1250. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 th.thickness 12 mm , min. size 1000x1000mm , tolerances as per ansi h35.2/ hal std. 1250. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 , th.thickness 14 mm , min. size 1000x2000mm , tolerances as per ansi h35.2/ hal std. 1250. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 , th.thickness 20 mm , min. size 1000x1500mm , tolerances as per ansi h35.2/ hal std. 1250. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 th.thickness 22.5 mm , min. size 3 feet x 6 feet. , tolerances as per ansi h35.2/ hal std. 1250. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 , th.thickness 32.25 mm , min. size 1000x1000mm , tolerances as per ansi h35.2/ hal std. 1250. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 , th.thickness 25.4 mm , min. size 1000x2000mm , tolerances as per ansi h35.2/ hal std. 1250. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 , th.thickness 12.7 mm , min. size 1000x2000mm , tolerances as per ansi h35.2/ hal std. 1250. , alclad al.alloy plates , spec. 2014/2014 a-t6 /wp/t651 , cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad , is 736/al.clad 2014 , astm b209/ d.t.d 5040 a/hal std 1250 , th.thickness 16 mm , min. size 1000x1000mm , tolerances as per

CTN :45137445

27 Jun, 2026 21.45 Lacs

Siliguri - West Bengal

Tender For bid to ras tender for supply of z7 6640-008805 paper lens cleaning book of 100 sheets , w10 6675-000250 level surveying pocket abney , y3 6145-007489 cable power electrical flexible copper c , y3 6145-007493 cord power electrical flexble copper con , y3 6135-001363 lithium cell 3 5v dc size aa ls-6 ex , y3 5970-000575 insulation tape electrical cotton self a , y3 6135-000006 bty dry 1 5v no3 metal clad , y3 6135-000009 battery dry 1 5v no 6 , z7 5855-000717 dummy cell size aa with 33 ohms resis , v5 1240-000161 cover canvas 3a , n1 r72 1015-003940 cover for muzzle end 2a20-sb41-1 , m1 6920-000232 cleaning patch , z9 6140-005329 cell ni-cd 1 2v 700mah , y3 6145-007491 cable power electrical flexible copper c , w10 6675-000808 tape measuring steel 30 metrs , b3 1005-001474 lanyard pistol o g 35-inch double

CTN :45048307

31 Jul, 2026 NA

Tarapur - Maharashtra

Tender For corrigendum : : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of sp

CTN :45646820

29 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For corrigendum : annual tender for 2026-27 street light material supply in achirapakkam town panchayat - 40 watts fl tube light, 40wattsvpitcopperchoke, 40watts starter, side holder, street light aluminium fittingwithchokes,bulb& starter, 1*40 street light accessories, 1*40 w street light fitting cover, 1*40w sideholderbase, 20 wled 4feet tube light fittings, 24 w led 4feet tube light fittings, 28 w led 4feet tube light fittings, 30 w led 4feet tube light fittings, 36 w led 4feet tube light fittings, 40 w led 4feet tube light fittings, insulationtaperoll, 7/16 pvc insulated copper wire, 7/20 pvc insulated copper wire, 3/20 pvc insulated copper wire, 1/18 pvc insulated copper wire, 25 sqare mm 3 ½ “ ug cable, 50 sqare mm 3 ½ “ ug cable, hook up wire (patty wire), 2 core service wirw, 1/18 aluminum wire, 3/20 aluminium wire, 7/20 aluminium wire, 7/18 aluminium wire, 7/20 gi wire (service wire), 16 amps fuse unit, 32 amps fuse unit, 63 amps fuse unit, 100 amps fuse unit, 200 amps fuse unit, 500 amps fuse unit, "16amps dp switch with metal clad(fronthandle)", "32amps dp switch with metal clad(fronthandle)", "16amps dp switch with metal clad(sidehandle)", "32amps dp switch with metal clad(sidehandle)", "100amps tpn switch with hrc fusessheet steel double break", "125amps tpn switch with hrc fusessheet steel double break", "200amps tpn switch with hrc fusessheet steel double break", "315amps tpn switch with hrc fusessheet steel double break", "400amps tpn switch with hrc fusessheet steel double break", "16amps tpn metal clad swtich with re-wirable fuse units", "32amps tpn metal clad swtich with re-wirable fuse units", "63amps tpn metal clad swtich with re-wirable fuse units", "100amps tpn metal clad swtich with re-wirable fuse units", "200amps tpn metal clad swtich with re-wirable fuse units", procelain holder, peengan holder gls holder, "5000 w street light automatic on/offswitch iso:9000 – 1 set.", timer auto set, 1” pvc wiring pipe, 1”pvc wiring bend, 32mm service pipe set, 40w tl fitting street light clamp set, cable tag, e.b.rccpoleclampsetwithbolts&nuts1set, bi-metalicclamp3/20, bi –metalicclamp7/20, chokescrew, dbswitch, 25 ams bch contact set, eb service g.i box, g.i switch box (service box ), wooden plank for meter board, wooden plank for ariel board, 3/4” g.i bended pipe (suitable for led fitting), 1” g.i bended pipe for (suitable for led fitting), 1 ¼” g.i bended pipe (suitable for led fitting), 2.5 sq.mm 3 core copper flat cable, 4 sq.mm 3 core copper flat cable, 6 sq.mm 3 core copper flat cable, 10 sq.mm 3 core copper flat cable, 16 sq.mm 3 core copper flat cable, 20 w led street light fittings, 25 w led street light fittings, 30 w led street light fittings, 40 w led street light fittings, 45 w led street light fittings, 48w led street light fittings, 60 w led street light fittings, 70 w led street light fittings, 72 w led street light fittings, 80w led street light fittings, 120 w led street light fittings, 150 w led street light fittings, "70 w led street light fittings withdimmable driver", "72 w led street light fittings withdimmable driver", "90 w led street light fittings withdimmable driver", 120 w led street light fittings with dimmable driver, 150 w led street light fittings with dimmable driver, 100 w led flood light with dimmable driver, 120 w led flood light with dimmable driver, 150 w led flood light with dimm11864able driver, 200 w led flood light with dimmable driver, 100w led flood light with integrated driver, 120w led flood light with integrated driver, 150w led flood light with integrated driver, 100w led high bay lights fitting, 150w led high bay lights fitting, 200w led high bay lights fitting, "120w : 6500k : led ip65 : solar streetlight fitting", "40w : 12.8v : ip65 havells street lightfitting", "40w : 6500k , 10000mah : 10w panel :ip66 sensor type", "60w : 6500k , 15000mah : 15w panel :ip66 sensor type", "100w : 6500k , 20000mah : 18w panel :ip66 sensor type", 25 w led driver, 25 w mcpo cp w

CTN :45211880

20 Jun, 2026 NA

Parganas - West Bengal

Tender For bid to ras supply of alloy steel chain grade t(8) t0 specification is: 6215/1982(re-affirmed 2003) size: 22 mm. two legged

CTN :45436754

23 Jun, 2026 NA

Jamalpur - Bihar

Tender For supply of double legged alloy steel chain slings with master oblong and eye hook , specn. is :2760-1980,gr-80, capacity-10 ton ,length-6 meter, m.o.ring -50x293x232 mm. material should be supplied with test certificate from govt. of india approved lab. make: rud india, kito india or similar. [ warranty period: 30 months after the date of delivery ] ]

CTN :45373465

20 Jun, 2026 NA

Bangalore - Karnataka

Tender For supply of aluminium alloy connector with olive drab chromate over cadmium plate with copper bush and protective cap , aluminium alloy connector with olive drab chromate over cadmium plate wit4h copper bush and protective cap , electrical cable comma copper multi conductor tin coated plasticized pvc insulated over varnished cotton yarn braiding , electrical cable comma copper multi conductor tin coated film and pvc insulated , electrical cable comma copper multi conductor tin coated film and pvc insulated flexible hookup , copper ring terminal comma double splitter 1 point 5 sq mm x 4 point 3mm dia , copper ring terminal comma double splitter 0 point 75sq mm x 5 point 4mm dia , copper tin braid 6 x 10 mm , copper tin braid 10 x 16 mm , copper tin braid 16 x 24 mm , insulating sleeve pvc white 28 mm dia , insulating sleeve pvc white 22 mm dia , insulating sleeve pvc white 10 mm dia , insulating sleeve pvc white 8 mm dia , insulating sleeve pvc white 6 mm dia , insulating sleeve pvc white 5 mm dia , insulating sleeve pvc white 2 mm dia , locking wire steel 0 point 5 mm dia , atc binding wire 0 point 5 mm dia , insulation tape pvc black 18 mm width , cotton tape 20 mm width , poly propylane film 25 microns 50 mm width , surgical tape adhesive tape usp leukoplast 20mm width , iso propyl alcohol ipa , potting compound ana bond 909 , solder soft 16 swg sn 6 pb 37 , solder flux , aluminium clad sheet 0 point5mm thk 0 point 5 mm x 1200 x 700 mm is 737 , nylon thread white 0 1 mm dia , plastic cover 80 microns 18 x 24 , permanent marker pen black * /bid number : gem/2026/b/7513397 + /dated: 30-05-2026 ' ' / bid document 1 / 33

Central Government/Public Sector

CTN :45345573

06 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For supply of polypropylene rope 18mm dia 3 strand , 75mm by 6 mtr by 3 ton polyester web sling , steel wire rope 12mm fiber core, 6by37 , steel wire rope 16mm fiber core, 6by37 , steel wire rope dia 18mm const 6by37 , steel wire rope dia 22mm, 6by36 constn. , steel wire rope dia 25mm const. 6by37 , steel wire rope dia 32mm const. 6by37 , alloy steel chain io mm is 6215bylatest , alloy steel chain 12mm is 6215by1982 , alloy steel chain 16 mm is6215by82

CTN :45098566

22 May, 2026 NA

Shimla - Himachal Pradesh

Tender For bid to ras bid to ras supply of sliding bolt aliminium 200mm , sliding door bolt 200mm ms , sliding door bolt aluminum 250mm , sliding door bolt aluminum 300mm , sliding door bolt ms 250mm , sliding door bolt ms 300mm , ss greating cp 100mm , ss greating cp 125mm , stainless steel handle , stop cock cp 15mm , tower bolt aluminum 100mm , tower bolt aluminum 150mm , tower bolt aluminum 200mm , tower bolt aluminum 300mm , tower bolt ms 100mm , tower bolt ms 150mm , tower bolt ms 200mm , turpentuine oil , water storage tank 1000 ltr , water storage tank 500 ltr , aluminium lugs suitable for 185 sqmm , aluminium lugs suitable for 95 sqmm , aluminium lugs thimble suitable for 35 sqmm , aluminium lugs thimble suitable for 50 sqmm , aluminium lugs thimble suitable for 70 sqmm , cable flexible copper conductor 56 or point 30 three core , cable pvc copper conductor 4 sqmm 3 core , cable pvc insulated and pvc un sheathed alum conductor 10 sqmm twin core , cable pvc insulated and pvc un sheathed alum conductor 2 point 5 sqmm twin core , cable pvc insulated sheathed alum conductor 1100 volts 10 sqmm twin core , capacitor 2 point 5 mfd , capacitor 3 point 15mfd , capacitor 4 mfd , ceiling rose , fan electronic regulator step or capacitor type 100 watt two module , foot valves 200mm , gate valve gm 50mm , led 10 watt bulb , led 7 watt bulb , led inverter street light 60 watt , mcb distribution board for 6 way metal clad , pvc insulation tape f or r 25mmx25rm long , pvc tape for r 15mmx25rm long , pvc tape for r 25mmx25rm long , timer switch for street light control 3 phase 08 kw , led tube batten fitting complete set 1x40 watt , xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , led luminaire for floodlight conforming to is 10322 (part 5/section 5) (v3) (under bis scheme - ii) (q2) , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , moulded case circuit breakers (mccb) conforming to is/iec 60947 (part 2) (q3) , led batten light (led tube light) (v2) (q2) , led luminaire (recessed luminaire) (ceiling light) conforming to is 10322 (part 5/section 2) (v4) (under bis scheme - ii) (q2) , led garden light (v2) (q2) //bid details 2 / 97

Alloy Steel Chain Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector